- Featured ads
- titanium bar
Titanium rod grades: GR1, GR2, GR3, GR5, GR7, GR12
Titanium rod implementation standards ASTM B348, ASTM F136, ASTM F67, AMS4928
Medical titanium rod
Specification: rolling ￠8.0---40mm×L; forging ￠40---150mm×L
Metallographic structure: The grain size of pure titanium is not less than grade 5, and the TC4 titanium alloy conforms to A1-A9.
Surface: black leather surface, car polished surface, polished surface (H11, H9, H8)
Medical titanium rod performance (refer to executive standard: ASTM F67/F136).
- titanium wire
Specification of titanium wire
Titanium wire size
Titanium wire size (4 sheets)
A. Titanium wire specifications: φ0.8-φ6.0mm
B. Specification of titanium wire for glasses: φ1.0-φ6.0mm dedicated titanium wire
C. Titanium wire specifications: φ0.2-φ8.0mm hanger dedicated
- titanium mesh
Grade: TA1, TA2, GR2, GR3, R50250, titanium alloy, etc.
surface: 1. Black (the surface contains graphite emulsion coating) 2. Bright (no graphite emulsion coating)
Mesh number: 0.2 mesh---400 mesh
In the environment of corrosion-resistant media, the high-purity titanium wire mesh forms a dense, strong adhesion and inert oxide film on the surface, which produces passivation and protects the titanium wire mesh matrix from corrosion, thereby achieving strong corrosion resistance. ; Especially in the following use environments, the corrosion resistance is better, such as: seawater, wet chlorine, chlorite and hypochlorite solutions, nitric acid, chromate metal chlorides and organic salts, etc. (for example: 60% nitric acid , The corrosion rate of pure titanium wire mesh in nitric acid solution is only 0.001mm.a-1); the State Council’s "Twelfth Five-Year" energy-saving and emission reduction plan requires that traditional industries are upgraded and upgraded, and the application of high-tech and advanced applicable technologies is accelerated. Traditional industries. Titanium mesh replaces traditional applicable materials with excellent corrosion resistance, such as nickel-free stainless steel mesh, aluminum mesh and other metal materials. Pure titanium mesh has a long service life and is safe and reliable in operation.
- titainium dish end
The dish head is a part of the container, which is connected to the cylinder by welding. (As shown in the figure below) According to different geometric shapes, it can be divided into spherical, elliptical, dish-shaped, spherical cap, cone and flat cover, etc., of which spherical, elliptical, dish-shaped, spherical cap-shaped heads are also collectively referred to as Convex head. In welding, it is divided into butt welding head and socket welding head. Used in various container equipment, such as storage tanks, heat exchangers, towers, reactors, boilers and separation equipment, etc. The materials are carbon steel (A3, 20#, Q235, Q345B, 16Mn, etc.), stainless steel (304, 321, 304L, 316, 316L, etc.), alloy steel (15Mo3 15CrMoV 35CrMoV 45CrMo), aluminum, titanium, copper, nickel and nickel Alloy etc.
- titanium elbow
The ways to connect with the pipe are: direct welding (the most common way) flange connection, hot melt connection, electrofusion connection, threaded connection and socket connection, etc. According to the production process, it can be divided into: welding elbow, stamping elbow, push elbow, casting elbow, butt welding elbow, etc. Other names: 90 degree elbow, right angle bend, etc.
application: To connect two pipes with the same or different nominal diameters, so that the pipeline can be turned at 90°, 45°, 180° and various degrees.
A bending radius less than or equal to 1.5 times the pipe diameter belongs to an elbow, and more than 1.5 times the pipe diameter belongs to an elbow.
- titanium flange
Titanium flange is a part made of non-ferrous metal titanium or titanium alloy that connects the pipe and the pipe to each other, and is connected to the pipe end.
There are holes on the titanium flange, and bolts make the two flanges tightly connected. The flanges are sealed with gaskets. Flanged pipe fittings refer to pipe fittings with flanges (lugs or sockets).
According to the structure
According to the structure type, there are integral titanium flange, butt welding titanium flange, looper titanium flange and threaded titanium flange.
Titanium flange grades: Grade1 Grade2 Grade5 Grade7 Grade9 Grade12 Ti6AL4V ELI, Ti6AL7Nb, Ti13Nb13Zr, Ti1533.
- titanium bolts
Products: titanium screws, titanium bolts, titanium nuts, titanium screws
Material: TA1, TA2, TC4, Gr1, Gr2, Gr5
Standard: GB DIN ISO
1. Titanium screws: round head screws, self-tapping screws, hexagonal screws, countersunk head screws, slotted screws, square head screws, double head screws, non-standard screws, fastening screws, standard screws, flat head screws
2. Titanium bolts: External hexagon bolts, square neck bolts, half-round head bolts, countersunk head bolts, carriage bolts, gasket combination bolts, various instrument lathe bolts, special-shaped non-standard bolts Purpose: electroplating, aluminum oxidation (anodic decomposition ), chemical industry, watch industry, medicine, breeding, electronic hardware, plastics and other industries.
3.Titanium nuts Hexagon nuts, self-locking nuts, ring nuts, knurled nuts, slotted nuts, hexagon nuts for precision machinery, special-shaped non-standard nuts.
- Ruthenium iridium titanium anode
The titanium anode is the anode in the titanium-based metal oxide coating. According to the different catalytic coatings on the surface, it has the function of oxygen evolution and chlorine evolution. Generally, electrode materials should have good electrical conductivity, small change in pole pitch, strong corrosion resistance, good mechanical strength and processing performance, long life, low cost, and good electrocatalytic performance for electrode reactions. Titanium is the most suitable for the above comprehensive The required metal is generally industrial pure titanium Gr1 and Gr2.
- titanium clad copper bar
The production methods of titanium-copper composite rods include hot extrusion, hot extrusion + stretching, explosive compounding or explosive compounding + hot rolling. They are mainly used to manufacture metal anode electrolyzers and other purposes.
- nicke wire
Nickel wire is a kind of metal wire with good mechanical strength, corrosion resistance and high heat resistance strength. It is suitable for making vacuum devices, electronic instrument components, and filters for chemical production of strong alkalis.
Nickel wire has high melting point, corrosion resistance, good mechanical properties, good pressure processability in hot and cold conditions, easy to outgas, suitable for radio, electric light source, machinery manufacturing, chemical industry, and is important in vacuum electronic devices structural materials.