https://www.facebook.com/NaturesOneCBD/ Price : 56 $

Website: https://www.bearingfamily.com/mounted-bearing-unit/4-bolt-flange-bearing/1-4-bolt-flange-mounted-bearings-ucf205-16.html GJP 1" 4-Bolt Flange Mounted Bearings UCF205-16, this flange-mount ball bearing unit has four round bolt hole in each side of square flange, its like the four ear equally spaced on four angle, and in the middle of this square, there is one round ball bearing with longer inner ring insert into the housing, the bearing was locked by set screw to the shaft and locked by anti-rotation stop pin to the housing, the housing is made by GJP into the square shape by filling the iron water into the housing-made mold, the iron water is more than 1000 degree centigrade, meanwhile, GJP paint with all of our housings at the electric static spraying equipment systems with around 180 degree centigrade, and paint at last into different color according to customer’s color code.

Website: https://www.bearingfamily.com/mounted-bearing-unit/take-up-bearing/1-1-4-take-up-unit-bearing-uct207-20.html GJP 1 1/4" Take Up Unit Bearing UCT207-20, which has combination of a set screw 52100 material steel insert bearing with slinger seal design and cast iron Take-Up housing with anti-rotation device,there are two wide slot in the side surface of housing, and there is bolt hole at the bottom, on the extended inner ring, there are two set screws 120 degree space to securing the shaft, it is non-expansion type, there is features with heavy duty, set screw locking, wide inner ring bearing, dual slinger contact seals, anti-rotation device and triple lip seals optional, UCT207-20 High quality 1-1/4" take-up bearing is widely used on Agriculture, Automotive, Pump, Sporting and Consumer Goods, Construction, Manufacturing Equipment, Conveyor and Fan Assemblies,Farm Machinery, HVAC, Feed Mill, Economical housed bearing solution and many other Industrial Equipment.

Website: https://www.bearingfamily.com/mounted-bearing-unit/hanger-bearing/1-hanger-bearing-ucha205-16.html GJP 1" Hanger Type Mounted Unit Bearing UCHA205-16, it has the biggest feature with one screw bolt hole and cylindrical shape, which is mainly for the conveyors application, so we call it screw conveyor hanger bearing also,and we could call it another kind of take-up bearing, the screw bolt hole could be fixed with a straight pipe thread and is available in both international and domestic thread configurations, Prior to mounting, clean both the shaft and the bearing bore. Coat the shaft with a small amount of oil. move the bearing unit on the shaft. Do not use big force like hammer on the ends of the inner race. If necessary to apply some force in mounting, use a soft metal bar or pipe against the inner race only. Tap the bearing unit into right place.

Website: https://www.bearingfamily.com/mounted-bearing-unit/plummer-block/90mm-split-plummer-block-bearing-housing.html GJP 90mm Split Plummer Block Bearing Housing SN520, which is bigger type of pillow block housing, it was designed as GJP with two split outer housing, which you could easily split it into two separate housings by getting out two bolts in both sides, and there is two steel material of locating rings for providing the axial location of the bearing assemblied, the bearing could be self-aligning ball bearing, or it could be spherical roller bearings with KW33C3, suffix W33 means the bearing with oil groove and oil hole, C3 means the clearance for the bearings, K means the tapered bore. GJP design our SN series with easy mounting and dismounting, various sealing options, multi-relubrication choice and case or end cover available, ande could be nether High-strength cast Iron or Ductile Iron Material. SN520 plummer block housing could be widely used on griculture, Light textile,Mining, Food and Industrial, where there is big loading capacity requirements.

Website: https://www.bearingfamily.com/stainless-steel-bearing/stainless-steel-pillow-block-bearing/1-1-4-stainless-steel-pillow-block-bearings.html GJP 1 1/4" Stainless Steel Pillow Block Bearings Housing SSUCP207-20 Equal with MUCP207-20 And SUCSP207-20. Which is designed with stainless steel housing and stainless steel bearing insert, the housing is SUS304 steel material, what’s more, there is a solid base heavy duty housing for GJP’s products,for the bearing, it is SUS440 material (Equal with Chinese stainless steel material code 95Cr18 according to GB-3086), bearing with bore of 1 1/4", and triple lip seal on the extended side, narrow inner ring with set screw lock, which is 120 degree space on the IR to lock the shaft(there is a +/-1 degree tolerance to the two 1/4-28 tapped hole positions)

Website: https://www.bearingfamily.com/radial-ball-bearing/miniature-ball-bearing/5x10x4mm-shielded-type-metric-miniature-ball.html GJP 5x10x4mm Shielded Type Metric Miniature Ball Bearing MR105ZZ, which is small radial ball bearing, GJP designs this bearing with ABEC-3 grade at least(and could be reaching to ABEC-7), Z3V3 quality level and greased with Exxon-Mobil Polyrex EM grease (could be wide temperature requirement greasing), chrome steel material for bearing race and steel ball, with Super-Finished raceway, and there are two metal shield on both sides of bearings, and customer could require to use the NBR rubber seal to sustitube the metal shield, which could be used on light-duty but high precision and high speed requirements place, normally these bearings are used in hobby industry like skating board or racing car, Boats, Robotics,Bycycle and many other applications which needs tough working environments, after years of experience, our Miniature Bearings were proved to has excellent performance and good durability, and because of it’s feature of smaller size, they could not be individual packed and instead, they are packed with plastic tube and then put into the box, which the distributor normally could sell with tube or box quantity. GJP designs our miniature ball bearing for applications of small gyros, anemometers, miniature gearboxes, small motors and radio controlled models etc.

Website: https://www.bearingfamily.com/radial-ball-bearing/metric-ball-bearing/20mm-bore-radial-ball-bearing-6204zzc3-or.html GJP 20MM Bore Radial Ball Bearing 6204ZZC3, which is single row type, and is made of one round shape Inner Ring, One Outer ring, one set of pressed steel cage(rivet type), one set of steel bearing, two metal Z-shields, and 30% to 35% volumn of bearing grease, GJP design our products with hardened chrome steel race and steel ball(HRC59 to 63), prelube type, and more stronger and bigger rivets on mounted steel cage, greasing on both sides of bearings, and in order for better sealing to protect bearing inside from dust, GJP design our deep groove ball bearing with V groove on outer diameter of inner race, and black chamfer on the corner of bearing race. There is C3 clerance design for this bearing, and there are Co, C2, C3, C4 for customer’s choice, and for the size precision, in order to gurantee our bearing to have excellent performance according to different application demands,GJP provide ABEC-1, ABEC-3 quality level(for smaller size, we could produce up to ABEC-5 quality level), 6204ZZC3 could be a 6204-2RS by replacing the Z shield into NBR seal. GJP designs our radial ball bearings are widely used on water pump, electric motor, gearbox, instruments, home appliance, engine, transportation car, bicycle, motor, agricultural equipment, construction machine, skating shoes and some sports equipments etc., deep groove ball bearings are one of the most widely used products.

Website: https://www.bearingfamily.com/needle-roller-bearing/needle-roller-and-cage-assemblies/single-needle-roller-and-cage-thrust-assembly.html GJP Needle Roller and Cage Assembly KZK25.1X30.1x14 is a single row Needle Roller Bearing, and It could easibly be identified with "K"as a single type, and meanwhile "KK" is designed as double row type, at the same time KZK25.1X30.1x14 could also be name with K25.1X30.1x14, this bearing include needle rollers and steel cage only, and normally GJP call the cage type with "M" type cage, which is suitable for this bearing application, normally for this bearing, the material for cage is #20 seemless steel, and ≤0.1mm cage concentricity, and process with cage length tolerance at -0.25mm to -0.15mm, get rid of all spurs, for needle rollers, they are made of Chrome steel hardened material Gcr15, with hardness at around HRC61 to 62, on needle roller both end with double grinding process to ensure the roundness(flat end is not allowed), and needle roller front face with 4 grinding process at least, so that it could gurantee less damage on pin and connecting rod when bearing was assembled. This Bearing could be coated with different kind of color, it could be their original color, it could be coated with silver, Copper, Black etc. which is decided by customer’s market needs and motocycle requests. When you design this bearing, you need to be very careful on the needle roller tolerance, as instead of shaft, this bearing was insert with the pin instead, sometimes if the roller outer diameter is big, the pin could not go through the hole, and also GJP focus a lot on the both end of needle roller and the slot process, as we need to make sure the roller could move up and down in the cage slot freely and not fall down. For the replacement market, some customer buy the cage and needle rollers separately, so that they could repair at their most conveniently. This GJP needle roller and cage assembly bearing is popular used in the big end of connecting rod on the motor model Hero Honda.

Website: https://www.bearingfamily.com/thrust-bearing/tapered-roller-thrust-bearing/gjp-inch-size-of-tapered-roller-banded-thrust.html GJP high precision tapered roller thrust bearing has the inner structure of tapered roller, which has a tapered roller spaced on each slot of bronze cage, and as it can bring a very compact axial bearing arrangement. Such bearings can withstand heavy axial loads, which are insensitive to impact loads, and have good rigidity. Because of it’s tapered roller structure, the rolling generatrix and the raceway generatrix of the washer meet at a certain point on the axis line of the bearing, so the rolling surface can get pure rolling and the limiting speed is higher than the thrust cylindrical roller bearing

Website: https://www.bearingfamily.com/special-bearing/x-ray-bearing/gjp-high-precision-and-long-operating-life.html GJP take good care of customers’X ray Tube construction and designs Long Working Life X Ray Tube Bearing with one special material of flange bottom, which is connected with a shaft to two high precision bearings, between these two miniature high precision bearing, there is a steel tube and C cup, this two bearing could have the precision up to ABEC-9 grade which is up to the X ray tube request, and C Type cup could be polished, or it could be Phosphating blackening, in order for great working of this tube bearing to be fixed in the X Ray tube, this X ray bearing need to be special coating, and have a very low noisy and vibration requirements, and could be workable under high temperature at around 450 degree centigrade and because of the high speed of anode rotation,GJP provides the special material steel ball for the bearing to be workable under the high speed at around 12000 RPM, because of the anti-rusty oil treatment before shipment, it requests GJP end users to have special cleaning treatment of the anti-rusty oil before this bearing to be applied on the tube, so that we could make sure this anti-rusty oil does not have no impact on the vacuum in glass envelope of x-ray tube, also it’s very important to do a special process to reduce decibel level this X Ray tube bearing unit, which could gurantee the bearing to be long life working possibility and great X ray image.